Encaustic and Glass Mixed Media Mobile

~ * ~

This article is written by Anjuli Johnson

Every once in a while, I slip away from my usual style of work and am inspired to create something drastically different from anything I’ve ever done before.  Whenever this happens, it’s always very exciting and terrifying at the same time.  I think one reason I tend to stay within my practiced range of techniques is that I know what I’m doing- doing something different means a necessary amount of experimentation and trial and error, which may work, or it may not.  Terrifying though it may be, it’s so important to experiment with new techniques, because obviously that is how we learn and develop our artistic talents, especially if you are self taught.

I have worked with encaustics before, but never on fabric, so I knew bringing my mobile idea to fruition was going to be tricky.  I used brocade as my base, not only for its beautiful colors and designs, but because I could leave the edges frayed or burn them smooth.  You can see I chose frayed for some, and smooth, burned edges for others.

I cut 2*2 inch squares of glass for inside my encaustic pieces and random broken pieces to hang from them.  Alcohol ink is what I used to give them a stained glass effect.  You need to use Krylon acrylic coating as a sealant so the ink doesn’t smear.  I used the cut glass squares as a template to stitch squares into my layers of fabric.  I cut out the squares of fabric, leaving an edge that the glass would sit inside once I finished working with the wax.

There are some things to be aware of if you’re going to attempt a similar project- first, the surface you are working on.  Make sure that it’s clean.  My art table is covered with paint drips and old glue, so I improvised another surface to work on.  The other thing is that for my squares of stitched fabric, I wasn’t painting on just one side as I would do when painting on wood.  Both sides of my pieces would be seen in this mobile format, so I knew I would be painting with wax on both sides.  If you’re not careful, working on one side can cause the wax on the opposite side to stick to the surface of your table and peel away.  I found it easier and less messy to work until I was nearly finished adding all my wax and embellishments on one side, and then begin work on the other side.  You need a heating tool to heat the wax between layers so they fuse together- when I finished working on one side fusing the wax, I would lay it on the other side to begin painting, and hold it loosely in my hand to fuse it rather than lay it on the table to fuse it.  This keeps the wax on the fabric rather than peeling away and sticking to the table.  Be careful using your heat gun while you do this- you don’t want to burn yourself.  But I was able to do this quite easily and it worked much better.  Of course, encaustic is a very forgiving medium.  If something goes wrong, don’t fret.  There are always ways to fix mistakes or mess ups, so it’s really the perfect medium for experimentation.

I used around 6-7 layers of wax on each side, and it’s with the last couple that I added most of my embellishments.  (You can use as many as you would like, as long as you fuse between each layer.)  I used stamped and drawn images on rice paper, Tim Holtz patterned tissue paper, rub-ons, metal objects like keys and gears, and india ink stamped and drawn right onto the surface.  You’ll need to add a layer

of wax over any paper or metal embellishments you add, but if you are stamping or drawing with india ink, you can let it dry on the top layer without needing to add any more.

There are countless encaustic techniques you can use on a project like this.  One of my favorite resources is a book called “The Encaustic Studio” by Daniella Woolf. Of course, there are seemingly endless resources on pinterest and youtube, as well.  Check them out, but as I said before, don’t be afraid to experiment and try new things.  They may work, they may not, but I have found that any art experiments you try are well worth the risk!

My biggest risk was building my own mobile frame- fun, but tough.  I’m definitely going to need to practice my mobile-making skills.  The best part was adding the       wire around the glass and the frame- the swirls of dark metal give the whole piece a rather whimsical quality.

So, that’s my venture into the unknown!  I made mistakes, fixed them, had to scrap a few of my original ideas when they didn’t work, but I’m pretty happy with how everything turned out.  Not only that, but I feel like I have a little more courage stored up for the next random idea that pops into my head.  What new things are you going to try this week?

 

Each of us must face our fears and try new things if we’re going to continue to grow as artists.

~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~

Author bio:  Anjuli Johnson  is a Mixed Media Artist from Raleigh, NC.  She began her art career as a scrapbooker, and it’s been an evolutionary process every since.  She loves all things mixed media- paper, glue, paint, canvas, pens, wire, gears… the list goes on and on.  She is constantly trying to push through her fears to discover and develop her talents, meet new people, and learn from those around her.  Check out Anjuli’s Facebook page to learn more about her.

~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~

.

.

Technorati Tags: , , , , , , ,

Create Your Own Rub-ons

This article is written by Debbie Davis

I’ve been reading Marney Makridakis’ new book called Creating Time. I was intrigued by the name of this book because I always find myself saying things like, time goes by so fast, I don’t have enough time, etc.  I am hoping it will help me to at least feel like I have more time.  I am working on the first “Artsignment” in the book, which is creating a time box.

I wanted to add some quotes on time to the box and needed a quick, simple way to do it.  I had recently made my own text rub-ons for another project and thought that would be a great way to add text and dates to the box.

Creating text rub-ons

I found the quotes on-line by googling “time quotes” and then copied and pasted them into a word document.  I changed the font to a size and style that would fit on my project.  Using overhead transparency film, I placed the film into my inkjet printer so that the text would print onto the smooth side.

When creating rub-ons this way, you need to make sure to print text in a mirror image, otherwise it will be backwards when you rub it on your project.  Also, be careful not to touch the ink after printing or it will smear.  Lay the film, smooth side down, onto your project and, using your fingernail or a wooden craft stick, rub over the text/image you want transferred.  You can rub as light or as heavy as you want, depending on how clear you want the text/image to be.  I like to print off a string of symbols such as ########## and just randomly rub them on.

How to rub a text or image

After rubbing the quotes, etc, onto my time box, I decided to see if I could re-use any ink that might be left on the film.  I was so surprised to find that I could get another print out of most of what was on the transparency.  It was very light, but that just added to the look I was going for.

I added some additional text using the rub-ons so that it was darker in some areas.

Adding texts on the rub-ons    Rub the quotes on the time box

Please note that the rub-ons will not be permanent and will smear if you brush over them with anything wet such as paint or glue.  To set the ink, I took my project outside and lightly sprayed it with a little matt coating before doing any additional “wet” work on it.

Think of the possibilities with creating your own rub-ons!  Here’s an image that I printed onto the film and then rubbed on some scrapbook paper.  I found that you don’t need to set the ink when transferring the image to paper, unless the paper has been previously painted on or coated with any type of acrylic medium.

rubbing on a scrapbook paper

This is a fast and fun way to add text, numbers and even images to your art.

 

~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~

My name is Debbie and I live in Morton, Illinois (USA). I’m happily married and have a wonderful family that includes a daughter, son, son-in-law and 2 of the sweetest grandchildren ever!

What I love most about mixed media art is that you don’t have to be an expert at anything to create beautiful art. It is a great way to recycle found objects. Art is such a wonderful stress reliever. I just wish I had more time to play!

I have a shop on Etsy called Artful Explorations where I place some of the art I have created for sale.

~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~

.

.

Related Posts Plugin for WordPress, Blogger...

Technorati Tags: , , , ,